ช่วย ปรับปรุงประสิทธิภาพในการสร้างระบบจำลองเสมือนจริง (Virtualisation)และฐานข้อมูลด้วยหน่วยความจำที่มีความจุสูงขึ้นและ Windows Server ให้คุณประหยัดมากขึ้นด้วย DIMM ที่ราคาถูกกว่าและมีขนาดเล็กลง และด้วย M-Series Blades นอกจากนี้ M- Series Blade สามารถช่วยให้คุณเพิ่มขนาดได้มากถึง 128 Cores และห่วงวามจำต่อ 10U chassis ได้มากถึง 1,536 GB เพื่อตอบสนองต่อความ้อารด้านแอพพลิเคชั่นที่มากขึ้น และคุณยังสามารถปรับขนาด I/O Application Bandwidth ได้อย่างมีประสิทธิภาพด้วย End - to - End 10Gbe หรือ FC8 Solutions และสามารถใช้ NPIV และ Port Aggregator Modes ได้กับสวิทช์หลากหลายรุ่นในารทำ Virtualise พอร์ท Ethernet หรือพอร์ท Fibre Channel เพื่อร่วมเข้ากันกับ Heterogeneous Fabrics
Processors
- intel Xeon 5500 series Dual and Quad Core 60W, 80W, and 95W TDP options
Chipset Intel
- TM 5520
Memory
- 12 DIMM slots
- 1GB/2GB/4GB/8GB ECC DDR3
- Support up to 96GB 5 using 12 x 8GB DIMMs
Embedded Hypervisor (Optional)
- CCitrix XenServer
- Microsoft Windows Server 2008, with Hyper-VTM
- VMware ESXi v3.5
Operating Systems Factory Installed OS
- Microsoft Windows Small Business Server 2008, Starndard Edition and Premium Edition
- Microsoft Windows Essential Business Server 2008, Standard Edition and Premium Edition
- Microsoft Windows Server 2008, Standard Edition, (x64 includes Hyper-VTM)
- Microsoft Windows Server 2008, Enterprise Edition, (x64 includes Hyper-VTM)
- Microsoft Windows Server 2008, Datacenter Edition, (x64 with Hyper-VTM )
- Microsoft Windows HPC Server 2008
- Microsoft Windows Web Server 2008
- Microsoft Windows Server 2008 SP2
- Novell SUSE Linux Enterprise Server 11
- Novell SUSE Linux Enterprise Server 10 SP2 x86_64
- Red Hat Linux Enterprise v5.3
- Red Hat Enterprise Linux 5.2
Supported OS
- Microsoft Windows Server 2003
- Novell SUSE Linux Enterprise Server 11
- Red Hat Enterprise Linux 4.7
- Red Hat Enterprise Linux 5.3
- Sun Solaris TM 10
- Storage SAS, SATA, Near-line SAS, SSD:
- 2.5" SAS (10K rpm): 73 GB 2 , 146 GB 2 , 147 GB 2 , 300 GB 2
- 2.5" SAS (15K RPM) 36 GB 2 , 73 GB 2 ro 146 GB 2
- 2.5" SATA (7.2K): 80 GB 2, 120 GB 2,160 GB 2, 250 GB 2
- Solid State Drives (SSD): 25 GB 2 or 50 GB 2
Maximum Internal Storage:
- Up to 600 GB 2 per blade via two x 2.5" 300 GB 2 hot-plug SAS hard drive
External Storage
Disk Storage Options:
- Dell/EqualLogic PS5000 Series
- PowerVault TM NX1950 Unified Storage Solution
- PowerVault MD3000i
Dell/EMC products:
- Dell/EMC fibre channel and/or iSCSI external storage, including Dell/EMC CX300, CX3-10c , CX3-20, CX3-40, and CX3-80; CX4-120, CX4-240, CX4-480 and CX4-960
Drive Bays
- Two 2.5" SAS/Solid State Hot-Swappable Drives
I/O Mezzanine Card Options
Up to two total PCIe x8 Mezzanine Card slots per M610 blade (optional) Available Options for both slots:
- Dual Port Gb Ethernet w/ TOE (New Broadcom 5709)
- Mellanox ConnectX Dual-Port Quad Data Rate (QDR) InfiniBand (Fabric C only)
- Mellanox ConnectX Dual-Port Dual Data Rate (DDR) InfiniBand (Fabric C only)
- 10Gb Ethernet Broadcom 57710
- Dual Port FC8 Qlogic ? QME2572
- Dual Port FC8 Emulex ? LPe1205
RAID Controllers
- SAS6/IR (Raid 0/1) hardware based
- CERC6/IR (Raid 0/1 w/ Cache)
- PERC 6i Modular (RAID 0/1 w/ battery-backed cache)
- PERC 6.2 Firmware
Communications
- Two embedded Broadcom ? NetXtreme II TM 5709 Gigabit Ethernet NICs with failover and load balancing TOE (TCPIP Offload Engine) supported on Microsoft ? Windows Server 2003, SP1 or higher with Scalable Networking Pack. iSCSI Offload supported on Microsoft Windows Server 2008, Microsoft Windows Server 2003 SP1 or higher, Red Hat? Linux? Enterprise 5, and SUSE LINUX Enterprise Server 10. Scalable Networking Pack for Microsoft Windows Server 2003 is not required.
- Boot from SAN (iSCSI and FC) supported
Optional add-in NICs:
- See I/O Mezzanine Card Options
Optional add in HBAs:
- See I/O Mezzanine Card Options
- Fully populated mezz card slots and switch modules will yield 3 highly available, redundant I/O fabrics for each blade.
Power
- Supplied by Dell's M1000e Blade Chassis
Video
- Matrox G200
Chassis
The PowerEdge M610 blade server fits in the M1000e blade enclosure. A total of 8 full-height or 16 half-height blades can fit into every M1000e enclosure. Full height and half height blades can be mixed in M1000e enclosures with no limitations.
M610 Dimensions and Weight (blade only):
- Height: 18.9 cm (7.4 in)
- Width: 5 cm (2 in)
- Depth: 48.6 cm (19.2 in)
- Weight (Maximum Configuration): 5.2-6.4 kg (11.5-14.0 lb)
- Full height blade fits inside the M1000e Blade Enclosure Maximum of 8 per - - blade chassis
Management
- Dell OpenManage featuring Dell Management Console
- Lifecycle Controller
- iDRAC6 Enterprise (Optional)
- VFlash (Optional)
Regulatory and Environmental Compliance
- Regulatory Model: HHB
- Regulatory Type: HHB001
|
 |
