Performance

One to twelve 3.5/2.5-inch SAS or SATA hard disks: support hot plugging; advanced LSI RAID card technology
One or two quad-core/hexad-core Intel 5600 Xeon processors: the processors are connected to the Tylersberg bridge chip through two full-bandwidth Quick Path bus interfaces
Uses the power supply of the 80plus specification; supports the function of monitoring the temperatures of key components such as the CPU and memory, and overall system (the temperature of intake) in real time
Supports intelligent fan speed adjustment and intelligent CPU frequency adjustment to reduce power consumption
Supports real-time monitoring of the system power consumption.
A BMC integrated on the RH2285, providing an independent IPMI 2.0 management network interface
Support of remote KVM over IP,SOL, and virtual media
Support of Firmware upgrade
Customization support

Processor

The RH2285 uses two Nehalem-EP 5600 series quad-core/hexad-core processors with the maximum frequency of 2.93 GHz. L3 cache of the processor supports at most 12 MB

Chipset

Intel Tylersburg IOH + ICH10R

Memory

12 * DDR3 800/1066/1333 RDIMM / UDIMM sockets
Provides maximum memory of 192GB

Storage

The RH2285 supports at most twelve 3.5-inch SAS/SATA2 hard disks, with the SAS hard disk having a maximum capacity of 12TB and the SATA hard disk with a maximum capacity of 24TB
Hot swappable hard disk support
The LSI 1068E SAS sub-card can be used to support RAID 0/1/1E
The LSI 1078 SAS RAID sub-card with the cache of 512MB can be used to support RAID 0/1/5/6/50/60
The LSI 1078 SAS RAID sub-card can be configured with the battery backup unit for power failure protection
Optional: Slim DVD-ROM 8X with SATA interface can be used

Network interface

Two onboard GE ports (RJ-45), supporting PXE and TOE
One 10/100M Ethernet port for management, one DB9 series port, and one DB15 VGA port
Four USB2.0 ports (2 in front, 2 in rear)

Management system

The embedded BMC module supports the IPMI 2.0 specification, which can provide management functions including remote power-on or power-off, reset, log recording, and hardware monitoring
SOL support
One 10/100M Base-T management interface is provided on the rear panel
The Web-based management interface is provided. No other management software is required
The remote and local management operations can be performed through the IPMITOOL
Remote KVM (KVM over IP) is supported. This design can be implemented in the later version
The system supports virtual media to provide remote virtual CD-ROM and floppy services. This design can be implemented in the later version
The system supports the remote firmware upgrade

Dimensions

Height: 87.5mm (2U space)
Width: 448mm
Depth: 700mm

Power supply

The system uses the 750W 110V/220V power module (default configuration), which can be configured in the 1+1 redundant configuration mode and installed/uninstalled with the power on

OS & Virtual system

Microsoft Windows Server 2003 and 2008
Red Hat Enterprise Linux
SUSE Linux Enterprise Server
Vmware
Citrix Xen Server
Oracle linux
Oracle VM

IO

One x8 PCI Express and one X4 PCI Express
with full-length/full-height